Crystal's range of cladded pipes

Cladded / weld overlayed pipes for oil & gas / petroleum industry
Cladded vessel fabrication
Nickel based weld overlay in pipes, nozzles, elbows, tees and valves

The cladding process consists of providing a specific surface on backing metal. Cladding is normally used in terms of plates, wherein a corrosion or wear resistant plate is applied on a backing plate. This provides the benefit of mechanical properties of base metal with the corrosion or wear resistance properties of the clad material.


Clad plates provide an economical alternative and thus find wide application in construction of pressure vessels, heat exchangers, columns, reactors, pipe spools and other such applications.


Clad plates – either hot rolled or explosion bonded – as per Client Specifications have been employed in construction of pressure vessels, heat exchangers and components by Crystal Industrial Syndicate.


Crystal’s experience in clad material fabrication can be estimated with the wide range of clad materials – Austenitic Stainless Steels and High Alloy Steels such as Monel®, Inconel®, Incolloy®, Hastelloy® on carbon and low alloy steel base formed, fabricated, welded and tested.


Crystal Industrial also has experience in supplying components which have been lined (strip-cladded) with hard wear resistance plates.


Such components have been supplied for Ventrui Scrubbers, Coal Handling Unit, Ash Collector Units and similar units where protection of internal surfaces of base material is required.


Crystal has supplied vessels of clad material consisting of Austenitic Stainless Steel, Monel®, Hastelloy®, Inconel® Incolloy® on carbon steel and low alloy steel base.


Weld overlay is a fusion welding technique used to deposit weld metal on to a component to achieve the desired dimensions or properties, replacing lost metal or providing a wear or corrosion resistant surface.


Depending upon the application and economics, protection of internal surfaces of pipes is achieved either by providing cladding or providing weld overlay.


Clad plates however are limited to applications where cylindrical constructions of uniform large diameters, where accessibility to the inside of the component is available. Small diameter components, contoured surfaces which are difficult to be made from clad plates can be easily provided with the desired surface by employing weld overlay.


Crystal has been regularly supplying weld overlayed items to its various clients. Items such as pipe bores, flange bores and facings, fittings (elbows, tees, reducers, weldolets), special valves for sub-sea and offshore applications.


Weld overlayed components - corrosion resistant overlays (of Austenitic Stainless Steel, Monel®, Inconel®, Incolloy®, Hastelloy®) and wear resistant overlays (Stellite 6®) on carbon steel and low alloy steel base have been supplied by Crystal.


Crystal has expertise in fabrication of cladded as well as weld overlayed pipes and has supplied such pipes to a number of Clients to their satisfaction.


Cladding & Weld Overlay provides protection against corrosion and wear for process and pipeline equipment. Weld overlay can be applied to extend the service life of new parts, or refurbish parts that have corroded or worn surfaces. Crystals Integrated and advanced welding technologies provides effective welding solutions for:

  • - Oil & Gas Industries
  • - Sub‐Sea Applications
  • - Petrochemicals & Refineries
TYPES OF CLADDING PROCESS :
Weld Overlay:

Weld overlay is a fusion welding technique used to deposit weld metal on to component to achieve the desired dimensions or properties replacing lost material or providing a wear or corrosion resistance surface.


Explosion Bond:

Explosion bonding is a process of bonding two dissimilar materials with the help of pressure and heat produced by explosion. The explosive material is spread on the material to be cladded which is kept on top of the base material. On ignition of the explosive, resultant thrust bonds the clad plate on the base plate kept underneath. Various combination of clad plate and base plate thickness can be bonded, depending on the job requirements.


CLAD & WELD OVERLAY MATERIALS:
BASE MATERIAL:

Carbon Steel, Stainless Steel & Low Alloy Steel


CLAD MATERIAL:

SS304, SS316L, SS317L, SS410, UNS N0 8825, UNS N0 6625, Hastelloy C22, Hastelloy C276, Hastelloy B3, UNS N0 4400


WELD OVERLAY MATERIAL:

ER410S, 430, ER308L, 309L, ER309LMo, 316L, 317L, UNS N0 8825, UNS N0 6625, Hastelloy C22, Hastelloy C276, Hastelloy B3, UNS N0 4400



World-class cladded pipes

We make custom-manufactured cladded pipes to meet unique requirements of your processes.

Learn More

Extensively documented

Crystal's cladded pipes offer extensive documentation and process information.

Learn More

Common Questions about Cladded Pipes

Check out the frequently asked questions about cladded pipes answered here.

Learn More

Global Support for cladded pipes

Crystal's team of engineers offer global support for our cladded pipes, anywhere in the world.

Learn More
Do you have questions about our cladded pipes or need a quote?
Top